Wall Paint

Product Details:

Banking on our experts we are offering Surfa Floor Coat Enamel Paint to our clients.

Floor coat:

• Surfa Floor Coat is a special product based on high grade pigments and special synthetic resins which impart high abrasion resistance to the film along with toughness. Surfa Floor Coat is recommended for painting Concrete, Metal and Wood floorings. This enamel dries within 4 to 5 hours giving tough film with high abrasion resistance and pleasant finish. This coating has excellent adhesion and superb wear resistance.

 

Product Information Sheet – SURFA FLOOR COAT

• Surfa Floor Coat is a special product based on high grade pigments and special synthetic resins which impart high abrasion resistance to the film along with toughness. Surfa Floor Coat is recommended for painting Concrete, Metal and Wood floorings. This enamel dries within 4 to 5 hours giving tough film with high abrasion resistance and pleasant finish. This coating has excellent adhesion and superb wear resistance.

Request
Callback

Product Details:

We are a topmost organization providing Surfa Matt Black Enamel Paint at affordable rates.

 

Matt Black Enamel:

• Surfa Matt Black is synthetic Enamel designed for matt finish. This paint has excellent flow, hardness, durability and fast drying features. This can be used on interior plaster wall, wood and metal surfaces.

 

Directions for Use:

• Clean the surface thoroughly freeing it from dust, dirt, oil, grease & loose particles. Surface must be free from moisture.

 

Apply a coat of appropriate primer as follows:

• On Metal surface: Surfa Red oxide Metal Primer / Zinc Chromate Metal Primer / Zinc Phosphate Grey Primer.
• On Wood surface: Surfa Wood Primer.
• On Interior Plaster wall: Surfa Alkali Resistant Cement Primer (OB).
• Sand the surface with Emery 320 and wipe it clean. For better results apply a coat of Surfa KPF Putty for smoothening the surfaces.
• On primed, puttied and dried surface apply two finishing coats by brush or spray allowing 12/14 hours gap between coats.
• For thinning- use good quality GP Thinner to obtain brushing / spraying consistency.
• Packing: 200ml, 500ml. 1ltr, 4ltr, 10ltr & 20ltr.

 

Features:

• Good packaging
• Precise pH value
• Highly reactive

Request
Callback

Product Details:

Our organization is an eminent provider of Surfa Emerald High Gloss Enamel Paint to our clients.

 

Emerald:

• Surfa Emerald High Gloss Enamel is specially formulated with high opacity and light fast pigments to produce a durable, high gloss protective coating of outstanding quality. It is recommended for all interiors and exterior surfaces – properly primed and under coated, where a high standard of durability and protection is required. It is extensively used and recommended for finishing doors & windows, furniture & fixtures, hoardings, signboards, trucks, transport coaches, machinery and equipment and variety of other articles.
• Surfa Emerald Synthetic Enamel Super-White is a specially formulated shade for exclusive use for doors and windows, fixtures, furniture, etc. Its whiteness retention property is excellent.
• Surfa Emerald Synthetic Enamel has such excellent flow and leveling properties that it is difficult to distinguish a brushed surface from a sprayed surface. Its brushability is excellent.

 

Product Information Sheet - SURFA EMERALD:

• Surfa Emerald High Gloss Enamel is specially formulated with high opacity and light fast pigments to produce a durable, high gloss protective coating of outstanding quality. It is recommended for all interiors and exterior surfaces – properly primed and under coated, where a high standard of durability and protection is required. It is extensively used and recommended for finishing doors & windows, furniture & fixtures, hoardings, signboards, trucks, transport coaches, machinery and equipment and variety of other articles.
• Surfa Emerald Synthetic Enamel Super-White is a specially formulated shade for exclusive use for doors and windows, fixtures, furniture, etc. Its whiteness retention property is excellent.
• Surfa Emerald Synthetic Enamel has such excellent flow and leveling properties that it is difficult to distinguish a brushed surface from a sprayed surface. Its brushability is excellent.

 

 

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: TVS/Mini Auto
• Production Capacity: As per requirement
• Delivery Time: 3- 4 days
• Packaging Details: 20 L, 10L, 4L, 1L, 500ml, 200ml, 100ml & 50 ml

Product Details:

Surfa Coral Synthetic Enamel Paint is an economically priced and multipurpose enamel, which is ideally suitable for interior use. It is recommended for painting doors, windows, furniture and a variety of ferrous and non-ferrous surfaces. It can be easily applied by brush or spray to give a glossy, smooth and hard film. It has good flow and levelling properties.

• Recommended Primers:

     For Metals: Surfa Red Oxide Metal Primer
     For Wood: Surfalac Synthetic Wood Primer – White or Pink
     For Plaster: Surfalac Cement Primer

• Covering Capacity: 10-13 sq.mtr/ltr for 2 coats*(@13-18 microns dry film thick) 6-8 sq.mtr/ltr for 2 coats* (@ 23-26 microns dry film thick)

• Drying time (@28-30o C: surface dry – not more than 4 hours Hard dry – not more than 24 hours

Request
Callback

Product Details:

Hammertone Finish Enamel Paint is a special formulation of high-grade pigments and special synthetic resins that are highly durable in nature.

Features:

• This is modern Hammertone finish enamel recommended for exterior and interior use. It has an extremely tough and durable film which withstands severe weather conditions.
• Hammertone Finish is ideal for protection and decoration of metal and wood surfaces. It dries within 4-5 hours by giving an extremely rich attractive satin finish.

Product Information Sheet

 

• Hammertone Finish is a special formulation of high grade pigments and special synthetic resins that are highly durable in nature.

Request
Callback

Product Details:

Surfa Satin Finish Enamel Paint is a special formulation of high-grade pigments and special synthetic resins that are highly durable in nature.

Features:

• This is modern Satin finish enamel recommended for exterior and interior use. It has an extremely tough and durable film which withstands severe weather conditions.
• Surfa Satin Finish is ideal for protection and decoration of metal and wood surfaces. It dries within 4-5 hours by giving an extremely rich attractive satin finish.

Product Information Sheet

• Surfa Satin Finish is a special formulation of high grade pigments and special synthetic resins that are highly durable in nature.

 

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: TVS/Mini Auto
• Production Capacity: As per requirement
• Delivery Time: 3 -4 days
• Packaging Details: 20 L, 10L, 4L, 1L, 500ml, 200ml,

Product Details:

Semi Gloss Enamel Paint is a premium quality paint formulated to provide a smooth, semi glossy finish to masonry, wood & metal surfaces. This is water thinnable enamel paint and formulated to provide excellent durable finish. Paint has features like Low- VOC, LOW Odour and non-yellowing character when compared to conventional solvent based enamels.

• Application: Recommended for indoor application on Metal, wood and interior Masonry surfaces. Excellent choice for Residential and Commercial application.

• Covering Capacity: 10-13 sq.mtr/ltr for 2 coats*(@13-18 microns dry film thick) 6-8 sq.mtr/ltr for 2 coats* (@ 23-26 microns dry film thick)

Request
Callback

Product Details:

Surfa ALUMINIUM PAINT - STANDARD

 

Surfa ALUMINIMUM PAINT is formulated with leafing aluminum paste and anti-corrosive medium in dual pack system. It produces a brilliant metallic finish with exceptional durability. It has a heat resistance upto 200°C.

TECHNICAL DATA

DIRECTIONS FOR USE:-

Area of Application:-

Application on metals for anti-corrosive coating for all types of structural steel, metal sheets, bridges, oil/petrol storage tanks, transformers and lamp posts. (Can be augmented with solid colours to polychromatic metal finish).

• Clean the surface thoroughly to be free from dirt, oil, grease etc., by blast cleaning conforming to Sa 2.5. A coat of appropriate primer is recommended.

Mixing : Component "A" - Medium.

Component "B" - Non-leafing aluminums paste.

Mix 10 gms aluminium paste (Component B) in 90 ml of medium (Component A) to make 100 ml of aluminium paste standard paint. Maintain above ratio for good performance.

Mix thoroughly for 10-15 minutes prior to use.

Add GP Thinner is required.

APPLICATION:

Apply 2 coats by brush or spray allowing 12 hours (preferably overnight) interval between coats.

STIR WELL BEFORE USE

GENERAL RECOMMENDATIONS:

Keep Container tightly closed & not easily reach to children.

When applying, it is advisable to use proper protective equipment.

Harmful if swallowed, seek medical assistance.

Flammable material.

Store in cool ventilated place.

Request
Callback

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)