Surfa Coats India Private Limited
Basaveshwar Nagar, Bengaluru, Karnataka
SEND SMS
SEND EMAIL
Product Details:
| Application | By trowel or putty knife. |
| Brand | Surfa |
| Bulk Density | 1.2+-0.2 gm/cc |
| Setting Time | @ 25 deg C Max 3 hours |
| Color | White |
| Workability of mixed paste | 25 - 35 Minutes @ 30 deg C |
| Thinning | For thinning use clean potable water |
| Coverage | 30-40 Running metre/kg. |
| Shelf life | 12 months from the date of manufacture, when stored indoors at normal temperature in original unopen |
| Packing | 500g and 1kg in pouches. 25kg in PP sack. |
| C Box | 500g |
Surfa Crack Fill (Cementitious Crack Filler) is a single component cement based material formulated together with organic polymer powders. It has a property of non-shrink character and recommended for filling 3-5 mm wide cracks. It also helps in leveling undulations on plastered ceilings. Suitable for both internal and external surfaces.
Features
Product Details:
| Brand | Surfa |
| Colour | White. Can be tinted |
| Specific Gravity | 1.4+-0.2 gm/cc |
| Curing time | @25 deg C Allow to cure for 7 days |
| Coverage | 25-30 Rmt/kg |
| Shelf life | 12 months from the date of manufacture, when stored indoors at normal temperature in original unopen |
| Packing | 5 kg |
| C Box Packing | 6 x 500g 6 x 1kg 4x 5kg |
Features:
Product Details:
| Brand | Surfa |
| Color | White |
| Shelf life | 12 Months From Date of Manufacture |
| Thinning | As Mentioned in "Directions for Use". |
| Specific Gravity | 1.1+-0.2 GM/CC |
| Stormer Viscosity in KU | 110+-10 KU UNITS |
| Solids NVM | 52% |
| Drying Time | Around 30 Minutes 4-5 Hours |
| Coverage | 30 - Sqft/Litre Per Single Coat Depending on Surface Conditions and Absorption |
| Packing | 4ltr |
Surfa Heat Sheild is a heat reflecting coating. It is a water based paint formulated with specially designed acrylic polymer emulsion for floor coatings and walkway applications. The coating film reflects the rays of the sun and the heat-causing infrared rays, thus reducing the heat absorbed by floorings/walkways and thereby keeping the surface relatively cool by reduction in reduction in temperature.
Features and Benefits
Product Details:
| Application | Use Can be applied by a putty application knife. The consistency should be suitably adjusted by using General Purpose Thinner |
| Brand | Surfa |
| Colour | Grey & White |
| Drying Time | Under conditions of normal temperature and humidity recommended Dry Film Thickness (200 - 250 micron |
| Recommended for | It is recommended for use on rough metallic surfaces like castings, cupboards, steel furniture |
| Recommended Primer | Surfa Red Oxide Metal Primer |
| Thinner | General purpose thinner for adjustment of consistency, knife cleaning, etc |
| Recm Dry Film Thickness | 200 - 250 microns. In case of big dents the putty should be filled in stages giving a coating of 200 |
| Packing | 500gms, 1Kg, 2Kgs, 10Kgs, 20Kgs & 35Kgs Tins. |
We are a prominent organization offering Unicoat Knifing Paste Filler to our clients.
Unicoat Kpf:
Product information sheet – surfa unicoat knifing paste filler:
Product Details:
| State Of Matter | Powder |
| Packaging Size | 1 kg |
| Application | Walls & Ceiling |
| Brand | Surfa |
Surefiller is a superior quality formulation which expands when it dries. Surefiller lodges itself securely inside cracks and holes so that it does not fall out and leaves the surface uniform. Nails and screws driven onto dried Surefiller will be held strongly as if in brick. SUREFILLER should be mixed with water for most applications.
Mixing Instructions
Add powder to water (not vice versa) till you get a thick homogenous paste suitable for the application. ( Apprx. proportion -1 volume of water 3 volumes of powder) . Use only potable water.
Filling
Fixing
Leveling
Glazing Putty
Other Uses
Packing
Product Details:
| Form | Liquid |
| Brand | Surfa |
| Finish | High Gloss |
| Packaging Type | Bucket |
The expertise of our firm lies in offering Synthetic Clear Varnish Paint made using quality material.
Features:
