Interior Paint

Product Details:

Surfa Premium Interior Emulsion Paint is being offered by us at reasonable rates to our clients.

 

Surfa premium easy wash interior emulsion:

• Surfa EASY WASH Premium Acrylic Emulsion is a superior paint formulation based on a highly durable co-polymer resin, high opacity micronized pigments and with performance additives which contribute for improved wetting of the surface with paint ensuring smooth, excellent flow, even drying and easy to clean.
• Surfa EASY WASH Emulsion is the choice paint for beautiful interiors of a dream home. It is easy to apply. Formulated for easy cleaning of painted walls with mild soap solution and water
• Surfa EASY WASH Emulsion gives the walls a smooth matte finish to afford a rich and freshly painted look year-after-year.

 

Surface preparation:

• Clean the surface thoroughly, sand the surface with Emery Paper 180 rendering it free from previous paint coatings, flaking, loose particles, dust, dirt, oil, grease, grime etc. and wipe it clean.

 

Directions for use:

• On well dried and cleaned surface, apply a coat of Surfa Water Based Acrylic Cement Primer and allow drying for 6-8 hours.
• Rectify the undulations and smoothen the surface by applying thin coats of Surfa Acrylic Wall Putty allowing it to dry for 6-8 hours.
• Sand the surface with Emery Paper 320 and wipe it clean.
• Do not apply easy wash- premium emulsion directly over putty as that would lead to patchy appearance.
• On primed and puttied surface, apply 2 or 3 coats of EASY WASH Premium Emulsion thinned with 450/500ml of clean potable water for 1 liter of paint. Leave a gap of 3-4 hours between coats.
• To remove dirt, stain, from painted walls wash with water / mild soap solution (avoid detergent), after one month of painting.
• For base white, tinting if required must be done before thinning.
• Do not over thin.
• Stir well and strain before use.
• Contains no added lead, mercury or chromium compounds. Stir well and strain before use.
• (Information in this leaflet is given in good faith but without warranty).

 

Safety, health & environmental solution:

• Keep out of reach of children and away from food, drink and animal feed.
• Apply in well ventilated areas. Do not breathe vapour or spray.
• Do not pour leftover paint down drains or in water courses.
• Contain spillage using sand or earth.
• Store container in an upright position with lid tightly closed, in a cool and dry place.

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: TVS/ Mini Auto
• Production Capacity: As per requirement
• Delivery Time: 3- 4 days
• Packaging Details: 20 L, 10 L, 4 L , 1 L

Product Details:

We are stand out provider of Surfa Galaxy Interior Paint to our clients at affordable price.

Other information:

• Surfa Galaxy – Luxury Emulsion is a new environment friendly paint. It is Low Odour and Low VOC (Volatile Organic Compounds) Luxury Emulsion Paint, specially formulated to preserve the indoor air quality and to help reduce the incidence of respiratory and eye irritation. Paint is stain resistant, anti-bacterial and provides smooth, soft sheen and durable rich finish for interior walls.

DIRECTIONS FOR USE:
Surface Preparation:

• Clean the surface thoroughly, sand with Emery Paper 180 to render surface free of loose particles, flakes, dust, dirt, oil, grease etc. and wipe clean. Ensure there is no fungus or moisture on the wall.
• On well dried and cleaned surface, apply a coat of Surfa Acrylic Cement Primer-Interior Water Based and allow to it dry for 6-8 hours.
• Rectify the undulation. Smoothen the surface by filling dents/cracks with thin coat of Surfa Acrylic Wall Putty and allow it to dry for minimum 6-8 hrs. Sand the surface with Emery Paper 180 and wipe it clean.
• Apply second coat of Surfa Acrylic Cement Primer-Interior-Water Based and allow it to dry for 6-8 hrs. Sand the surface with Emery Paper 320 and wipe it clean.

Application:-
On well dried, cleaned, puttied and primed surface, apply 2/3 coats of surfa Galaxy- Luxury Emulsion thinned with 400ml of clean potable/municipal water for one litre of paint. Leave a gap of 4-6 hours between coats.

• Apply the paint by Brush/Roller or Spray.
• Dark shades may require additional coat for proper hiding.
• Do not apply surfa galaxy luxry emulsion Directly over putty as that would lead to patchy appreance
• For Base White Tinting if required, Must Be Done Before Thinning
• Do not over thin
• Stir Well and Strain Before use
• Removal of Stains/Dirt: To remove dirt/stains from painted walls, wash with water/mild soap solution (avoid detergents), after one month of painting (minimum). Tips Wipe the affected area with a clean and dry cloth to remove solid particles from the wall.
• For regular household stains like pencils, tea, coffee, etc., use 5% soap solution. For stains like turmeric, sketch pen, etc., use a mild dish wash solution (e.g. Pril vim liquid etc).
• For tough stains like pickle, shoe polish, crayons, oil etc., wipe the surface gently with sponge soaked with Mineral Terpentine.
• Do not use Liquid Bleach to remove stains.
• Use a soft cloth or sponge soaked with soap solution to remove stains- rubbing gently in a circular motion. Then, immediately wipe it with water using clean sponge to prevent stains from spreading.
• Once the stain is removed, wipe the wall with a clean dry cloth.

SAFETY, HEALTH & ENVIRONMENTAL INFORMATION:-

• Keep out of reach of children and away from food, drink and animal feed.
• Apply in well ventilated areas. Do not breathe vapour or spray.
• Do not pour leftover paint down drains or in water courses.
• Contain spillage using sand or earth.
• Store container in an upright position with light tightly closed, in a cool and dry place.
• (Information in this leaflet is given in good faith but without warranty).

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: TVS / Mini Auto
• Delivery Time: 3 - 4 days

Product Details:

Our organization is well known in offering Surfa Pearl Glow Emulsion Paints at affordable rates.

 

Surfa Pearl Glow Premium Acrylic Emulsion - Metallic Finish (WB):

• Surfa Pearl Glow Premium Acrylic Emulsion - Metallic Finish is a Premium Water Based Acrylic Emulsion that provides luxurious and pearl glow metallic finish to the surface.
• Pearl Glow Premium Acrylic Emulsion - Metallic Finish can be applied on interior and exterior walls, ceilings, columns and paintable wall coverings. It can be applied on stucco, asbestos and wooden surfaces.
• This is a water based and non-hazardous paint, free from toxic ingredients, lead, mercury, etc.
• Product Information Sheet – Surfa Pearl Glow Premium Acrylic Emulsion - Metallic Finish (WB)

 

Product Information Sheet – Surfa Pearl Glow Premium Acrylic Emulsion - Metallic Finish (WB):

• Surfa Pearl Glow Premium Acrylic Emulsion - Metallic Finish (WB) is a Premium Water Based Acrylic Emulsion that provides luxurious and pearl glow metallic finish to the surface.
• Pearl Glow Metallic Finish can be applied on interior and exterior walls, ceilings, columns and paintable wall coverings. It can be applied on stucco, asbestos and wooden surfaces.
• This is a water based and non-hazardous paint, free from toxic ingredients, lead, mercury, etc.

 

Surface preparation:

• Clean the surface thoroughly to render the surface free of previous paint coatings, loose particles, flaking, dust, dirt, oil, grease, etc., and wipe clean.

 

Directions for use:

• On well dried and cleaned surface apply a coat of appropriate Surfalac Primer, depending on the surface and allow drying for 6-8 hours
• Smoothen the surface by filling dents with thin coat of appropriate Surfalac Putty, depending on the surface and allow drying for minimum 8 hours
• For painting interior walls follow the standard procedure/practice applicable to premium emulsion. Rectify the undulations and sand the surface with Emery Paper 180 and wipe clean
• Apply second coat of appropriate Surfalac Primer and allow it to dry for 6-8 hours. Sand the surface with Emery 320 grade and wipe clean
• Apply a coat of Surfa Acrylic Emulsion thinning 1 liter of paint with 450-500 ml of clean potable water as a base coat and allow drying for 5-6 hours
• Apply 2-3 coats (as required) of Pearl Glow Metallic Finish thinning with 5-10% of clean potable water
• Apply with brush followed by roller application allowing 4-6 hours interval between coats
• For Designer Pattern/Finish transfer the paint to roller tray and apply one coat followed by an appropriate tool to create the desired design effect/pattern finish

 

Other information:

• Coverage: Approximately 65-70 Sqft/liter for 2 coats, depending on shade selected, surface condition/preparation, etc.
• Clean-up: Clean brushes, rollers and tools with warm soap water immediately after use
• Storage: Close tightly the container when not in use. Do not reuse the containers. Dispose of empty containers
• Packing: 100ml, 200ml, 500ml, 1L, 4L, 10L & 20L
• Note: Test the product in small conspicuous area to see if the desired results/performance obtained, before application on larger area. Stir well before use
• (Information in this leaflet is given in good faith, but, without warranty)

 

Features:

• Excellent packaging
• Quality approved
• Provide excellent finish

Product Details:

Supported by our professionals we are offering Surfa Plastic Emulsion Paint at affordable rates.

 

Other information:

• Surfa Plastic Emulsion is an economical and co-polymer based emulsion paint formulated for application on interior walls. Surfa plastic emulsion gives smooth, elegant and rich finish. Available in a wide range of shades.

 

Features:

• Long shelf life
• Smooth Texture
• Free from impurities

 

Product Details:

• Flat Oil Paint (Interior Wall Finish - Matt) Surfa Interior Wall Finish (Matt) is a durable Matt Finish Paint for walls Ceilings.
• An easily applied Interiors Wall coating which dries to a pleasant velvet Matt Finish. The dried film provides a hard wearing surface. It can be regularly cleaned without detriment to its appearance. The matt finish is useful in minimizing the uneven appearance of wall surfaces and ceilings.

 

Features:

• UV Resistance
• Scratch Resistance
• Quick dry

Product Details:

Acrylic Distemper:

• Surfa Acrylic Distemper combines the economic advantages of distemper with the time tested performance of co-polymer emulsions. Salient features of this product are excellent cleanliness of shades and a relatively shorter recoatability period of hours. Successive coats can be applied in shorter intervals. Surfa Acrylic Distemper is washable 7 days after application. The original brightness and beauty can be regained by wiping the entire surface with a mild solution of soap and water. The product is available in 36 beautiful standard shades.
• (Made with Eco-friendly water based Technology)
• Surfa Acrylic Distemper combines the economic advantages of distemper with the time tested performance of co-polymer emulsions. Salient features of this product are excellent cleanliness of shades and a relatively shorter recoatability period of hours. Successive coats can be applied in shorter intervals. Surfa Acrylic Distemper is washable 7 days after application. The original brightness and beauty can be regained by wiping the entire surface with a mild solution of soap and water. The product is available in 36 beautiful standard shades.

Product Details:

surfa “ CLASSIC” – Luxury Emulsion is a Water Based paint endowed with Low- VOC and Low Odour properties. The paint preserves indoor air quality. Paint is stain resistant and anti-bacterial. The paint provides smooth, soft sheen and durable finish for interiors.

The performance additives in the paint provide an improved wetting of the surface with paint ensuring smooth and even drying.

The product is ideal for use in Homes (particularly for children’s rooms & kitchens), Schools, Hospitals, and Hotels, as users can occupy the painted rooms within 3/4 hours after painting.

 

 

Product Details:

“Surfa Acryl” is solvent type single component acrylic based decorative coating for concrete, masonry and stucco. SURFA ACRYL is resistant to UV radiation, Carbon-dioxide, rainfall, heat and humidity. It has good DPUR properties and provides glossy finish.

Product Details:

Surfa One Coat is an unique acrylic emulsion paint specially formulated to provide excellent dry hiding, opacity and perfect durable flat finish in a single coat system.

 

Features Benefits:

• Single coat paint system
• Excellent dry hiding and opacity
• Quick drying
• Good washability
• No added formaldehyde, lead, mercury and chromium compounds

Product Details:

surfa " CEILING PAINT" is high-quality acrylic coating specially formulated for bright ceilings. Paint is recommended for application on masonry and artificial ceilings of residential or commercial buildings. The product is endowed with good adhesion, opacity and anti-fungal properties. Paint provides the beautiful flat rich finish.

Product Details:

Spectra Motion uses a patented technology that creates distinct colours when viewed from different angles which will truly make you want to look twice.  It is an advanced water-based coating which creates a high visual impact with reflectivity and scattering of light on the surface applied. It is a versatile product which can be used as a top coat on a pre-painted or interior textured wall to be transformed into spectra motion technology. This product can also be used on a pre-painted wall to texturise according to your imagination.

              

FEATURES AND BENEFITS:-

 

Additional Information:

• Delivery Time: 3 -4 days
• Packaging Details: 1 L, 500 ml

Product Details:

Product Description:

Surfa ANTI – CORROSIVE EPOXY COATING (Single Pack) is an epoxy resin based product specially formulated for metal surfaces. It has good anti-corrosive properties fortified with high-performance anti-corrosive pigments such as Red Oxide, Zinc Chrome and Zinc Phosphate etc. Provides tough coating and durable finish. The product is Lead-free.

Areas of Application:

Ideal for application on metals for anti-Corrosive coating with high wear and abrasion resistance.

Surface Preparation:

New Steel: Recommended abrasive blasting Sa 2.5 after degreasing and de-oiling of the surface. If steel is coated by primer clean the surface from oil, grease, dirt and moisture and any other foreign matter.

Maintenance: Remove oil, grease, dirt etc., with a detergent wash. Remove salty and other contaminants by high-pressure fresh water

Allow surface to dry before the application

Application Methodology:-

· Apply 2 coats giving an interval of 12 hours (preferably overnight).

· Mix 10-15 minutes before use.