Product Details:
Packaging Size | 4 ltr |
Brand | Surfa |
Finish Type | Matt |
Coverage Area | 150 square feet / Litre / coat |
Color | Yellow |
Thining | Add 10% GP thinner for viscosity adjustment |
Product Details:
Minimum Order Quantity | 500 Litre |
Brand | Surfa |
Coverage Area | 90 sft per Ltr per coat |
Usage/Application | Interiors walls |
Color | White |
Primer Base Type | Water Based |
Finish | Matt |
Packaging Size | 4 L |
Primer Type | Acrylic Primer |
Country of Origin | Made in India |
4L Surfa Acrylic Cement Primer is an advanced European Textured coating system, which is the ultimate in decorative protection offered to you by Surfa Coats, the pioneers in textured coatings. Conventional painting system like emulsions, distempers and Tex Matt paints though decorative in nature, do not provide adequate protection over a long period due to their compositions and very low film thickness. The concept of decorative protection today is met by polymer based coatings that breathe, i.e. they let moisture out of the substrate, yet remain water resistant, like human skin.
Product Details:
Composition:
Areas of Use:
Product Details:
Coverage Area | 100-120 square feet / Litre / coat |
Brand | Surfa |
Colour | White |
Packaging Size | 20 Litre |
Thinning | Mix 1 Litre of clean potable/municipal water with 1 Litre of Sealer-Aear |
Stormer Viscosity in KU | 110 +- 10 KU |
Water Resistance | Passes (4 Hours) |
Specific Gravity | 1.2 +- 0.2 g/cm3 |
Areas of uses | Fresh plaster, brickwork, cement rendering and asbestos surfaces |
Surface Drying Time | Within 20 minutes |
Volume Solids NVM | 35% |
Shelf Life | 12 months |
Alkali Resistance | 2% solution passes till 2 hours |
pH Resistance | 12.5 |
Hard Drying Time | 4 hours |
Product Details:
Brand | Surfa coat |
Packaging Size | 4ltr |
Paint Form | Liquid |
Is It Anti Corrosion | Yes |
Coverage | 150 square feet / Litre / coat |
Finish | Matt |
Thinning | Add 10% GP thinner for viscosity adjustment |
Product Details:
Form | Liquid |
Usage/Application | Exterior |
Packaging Size | 4 Litre |
Brand | Surfa |
Primer Base Type | Oil Based |
Application method | Brush |
Colour | White |
Drying Time | 35 minutes |
Our organization provides Oil Based Universal White Primer to our customers at feasible rates.
Product Details:
Primer Base Type | Oil Based |
Coverage Area | 10-12 square meter / Litre / coat at 25 microns DFT |
Brand | Surfa |
Application | Brush or Spray |
Packaging Size | 2 Litre |
Colour | Grey |
Finish | Matt |
Flash Point | Above 30 Degree C |
Storage Life | 12 months |
Surface Drying Time | 2-3 hours |
Hard Drying Time | 12-16 hours |
Interval Between Coats | Minimum 18 hours |
Recommended Dry Film Thickness | 25-30 microns per coat |
Surface Preparation:
Steel Surface:
Product Details:
Coverage Area | Approximately 100 square feet / coat |
Brand | Surfa |
Color | White |
Packaging Size | 4 Litre |
Colour | White |
Packaging Type | Tin |
Application | Apply 1 or 2 coats by brushing, allowing at least 6 hours in between coats |
Drying | Surface dry Not more than one hour |
Thinning | 10% GP thinner for viscosity adjustment |
Recommended for | Priming of all softwood both interior and exterior |
Hard Drying Time | Not more than 12 hours |
Product Details:
Coverage Area | 150 square feet / Litre / coat |
Color | Yellow |
Packaging Size | 4 Litre |
Brand | Surfa |
Finish | Matt |
Hard Drying Time | 16 hours |
Surface Drying Time | 30 minutes |
Thinning | Add 10% GP thinner for viscosity adjustment |
Recommended dry Film Thickness | 30 microns |
Product Details:
Brand | Surfa Cotas |
Packaging Size | 1 Ltr |
Packaging Type | Bucket |
Area Of Application | fresh plasters, brick work, cement rendering and asbestos surfaces |
Model Name/Number | SEALER-AEAR |
Country of Origin | Made in India |
Product Details:
Packaging Size | 20 L, 10L, 4L AND 1 L |
Packaging Type | Bucket |
Brand | Surfa |
Provide Home Painting | Yes |
Usage/Application | Exterior and Interior wall ( Combo) |
Type | Acrylic Primer |
Color | White |
INEX PRIMER is an acrylic cement primer recommended for both Interior and Exterior surfaces. It is a versatile product based on acrylic co-polymer emulsion and formulated to provide good opacity , hiding, coverage and good alkali resistance. It is easy to apply and seals surfaces for uniform finish.
Product Details:
Form | Liquid |
Packaging Size | 4 Litre |
Brand | Surfa |
Solid Content | 57% |
Coats Required | 1 Coat |
Dry for Recoating | 4 hours |
Shelf Life | 12 months |
Coverage | 100 square feet / Litre depending on surface condition and porosity |
Colour | White |
Viscosity in KU | 110 +- 10 KU (Stormer) |
Application | By Brush or Roller |
Specific Gravity | 1.35 +- 0.2 g/cm3 |
Packaging Type | Tin |
Surface Drying Time | 20-30 minutes |
Thinning | Mix 900 ml of clean potable water with 1 Litre of Inex Primer |
INEX Acrylic Cement Primer is an acrylic cement primer recommended for both Interior and Exterior surfaces. It is a versatile product based on acrylic co-polymer emulsion and formulated to provide good opacity, hiding, coverage and good alkali resistance. It is easy to apply and seals surfaces for uniform finish.
Benefits:
Packaging Size Available: 1 Litre, 10 Litre, 20 Litre
Additional Information:
Product Details:
Minimum Order Quantity | 1 Litre |
Primer Base Type | Water Based |
Brand | Surfa |
Form | Liquid |
Packaging Size | 4L |
Color | White |
Finish | Matt |
Coats Required | 1 Coat |
Coverage (Sq. feet) | 90 sqft per ltr single coat |
Surface Drying Time | 6 Hours |
Areas of Application | Fully matured interior wall, concrete, brick work and asbestos surfaces |
Method of Application | By Brush |
Hard Drying Time | 24 Hours |
Thinner | Clean potable water for Surfalac water-base cement primer, GP Thinner for Surfalac A/R quality oil |
Viscosity | 90 sec. (Ford Cup at 30 Degree C) |
Surfalac Acrylic Cement Primer:
Product Information Sheet – Surfalac Cement (Water based and Oil based):
Directions for use:
Product Prices:
Additional Information:
Product Details:
Minimum Order Quantity | 1 Litre |
Primer Base Type | Water Based |
Brand | Surfa |
Form | Liquid |
Packaging Size | 4 L |
Application surface | Walls |
Color | White |
Coats Required | 1 Coat |
Coverage | 150 Sq. Ft. per liter per |
Drying Time | Within 6 Hours |
Touch Drying Time | Within 1 Hour |
Hard Drying Time | Within 6 Hours |
Recommended for | Use as a primer over exterior surfaces which are to be coated with acrylic based exterior emulsion |
Thinning | To be thinned with clean potable water to obtain brushing consistency in the ratio of primer water |
Acrylic Exterior Cement Primer:
Directions for use:
Product Prices:
Additional Information:
Product Details:
Minimum Order Quantity | 400 Litre |
Brand | Surfa |
Coverage Area | 90 sft per Ltr per coat |
Usage/Application | Exteror Walls |
Color | White |
Primer Base Type | Water Based |
Finish | Matt |
Packaging Size | 4 L |
Packaging Type | Bucket |
Country of Origin | Made in India |
Coral Cement Primer Interior is an excellent water based primer formulated to resist alkali attack. This primer may be used on fully matured interior plaster walls as priming coat for any wall coating. It may also be used before repainting a wall of a different colour to ensure obliteration of the existing colour. This primer is fast drying and alkali resistant. This primer is easy to apply by brush and gives a smooth matt finish.
Available Packaging Size:
Additional Information:
Product Details:
Color | White |
Brand | Surfa |
Finish | Matt |
Method of Application | By Brush |
Packing | 4 L |
Thinner | Clean potable water for Surfalac water-base cement primer, GP Thinner for Surfalac A/R quality oil |
Surface Drying Time | 6 Hours |
Viscosity | 90 sec. (Ford Cup at 30 Degree C) |
Coverage | 150 Sq.Ft. per liter single coat depending |
Hard Drying Time | 24 Hours |
Areas of Application | Fully matured interior wall, concrete, brick work and asbestos surfaces. |
Our organization specializes in offering Coral Cement Primer to our customers.
Coral Cement Primer:
Product Information Sheet – Cement (Water based and Oil based):
Product Details:
Brand | Surfa |
Packaging Size | 4 L |
Color | White |
Thinning | To be thinned with clean potable water to obtain brushing consistency in the ratio of primer water |
Recommended for | Use as a primer over exterior surfaces which are to be coated with acrylic based exterior emulsion |
Coverage | Approximately 150 Sq. Ft. per liter per single coat depending on porosity and surface |
Drying | Within 6 hours. |
Description | Surfa Acrylic Primer - Exterior is an acrylic based product suitable for exterior use |
Our organization has gained name and fame in offering Coral Acrylic Exterior Cement Primer to clients.
Coral Acrylic Exterior Cement Primer:
Directions for use:
Features:
Product Details:
Minimum Order Quantity | 500 Litre |
Brand | Surfa |
Coverage Area | 85/90 Sqft per litre single coat |
Usage/Application | Interiors Walls |
Color | White |
Primer Base Type | Water Based |
Finish | Matt |
Packaging Size | 4 L |
Packaging Type | Bucket |
Country of Origin | Made in India |
Additional Information: